JUKI DLN-6390 - Applycation Of Grease

7
ENGLISH
＊
Apply grease to the
inclined line section.
5. Applycation of grease
Apply grease supplied with the machine as accessories (JUKI GREASE A TUBE : 40006323) to the portions as
shown in the illustrations below at the time of set-up.
• In case of DLN-6390
Apply grease to hinge screws (
＊
) of sections
A
through
C
and the periphery of the gears of section
D
when
replacing the feed adjusting gears.
• In case of DLN-6390-7
Apply grease only to section
D
in the illustration when replacing the feed adjusting gears.
D
A
C
B