EasyManuals Logo

Juniper EX Series Complete Hardware Guide

Juniper EX Series
194 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #177 background imageLoading...
Page #177 background image
When a switch is equipped with two AC power supplies, both power cords (one
for each power supply) must be unplugged to completely disconnect power to
the switch.
Note the following warnings printed on the label next to the power supplies:
CAUTION: THIS UNIT HAS MORE THAN ONE POWER SUPPLY CORD.
DISCONNECT ALL POWER SUPPLY CORDS BEFORE SERVICING TO AVOID
ELECTRIC SHOCK.
ATTENTION: CET APPAREIL COMPORTE PLUS D'UN CORDON
D'ALIMENTATION. AFIN DE PRÉVENIR LES CHOCS ÉLECTRIQUES, DÉBRANCHER
TOUT CORDON D'ALIMENTATION AVANT DE FAIRE LE DÉPANNAGE.
Power Cable Warning (Japanese)
WARNING: The attached power cable is only for this product. Do not use the cable for another product.
Related Topics General Safety Guidelines and Warnings on page 130
General Electrical Safety Guidelines on page 153
In Case of Electrical Accident
If an electrical accident results in an injury, take the following actions in this order:
1. Use caution. Be aware of potentially hazardous conditions that could cause further
injury.
2. Disconnect power from the switch.
3. If possible, send another person to get medical aid. Otherwise, assess the
condition of the victim, then call for help.
Related Topics General Safety Guidelines and Warnings on page 130
General Electrical Safety Guidelines on page 153
AC Power Electrical Safety Guidelines on page 154
In Case of Electrical Accident 155
Chapter 7: Safety and Regulatory Compliance Information

Table of Contents

Other manuals for Juniper EX Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper EX Series and is the answer not in the manual?

Juniper EX Series Specifications

General IconGeneral
SeriesEX Series
CategorySwitch
LayerLayer 2/3
Operating SystemJunos OS
ManagedYes
ACLsYes
Port DensityVaries by model
Power over Ethernet (PoE)Available on some models
Virtual ChassisSupported on some models
Form FactorFixed configuration, Modular
Switching CapacityVaries by model
Forwarding RateVaries by model
Power SupplyVaries by model (AC or DC, redundant options available)
ManagementCLI, Web UI, SNMP
RedundancyPower supply, fan, Virtual Chassis
LatencyVaries by model
Jumbo FramesSupported
VLAN SupportYes
MAC Address Table SizeVaries by model
QoSYes
Energy EfficiencyEEE (802.3az)
DimensionsVaries by model
WeightVaries by model
Operating Temperature0° to 45° C
Storage Temperature-40° to 70° C
Humidity5% to 90% non-condensing
MTBFVaries by model
WarrantyLimited Lifetime

Related product manuals