Juniper EX Series - Using the CLI Viewer in the J-Web Interface to View Configuration Text

Table 12: Optical Interface Support for SFP Transceivers in EX 3200 and EX 4200 Switches (continued)
SpecificationsTransceiver
EX-SFP-1GE-LXModel number1000Base-LX Gigabit Ethernet optics
10 km (6.2 miles) on 9 microns SMF
cable
Maximum distance
1310 nmTransmitter wavelength
–9.5 dBm through –3 dBmAverage launch power
–25 dBm through –22 dBmReceiver sensitivity
LCConnector type
EX-SFP-1GE-LHModel number1000Base-LH (also called 1000Base-ZX)
Gigabit Ethernet optics
70 km (43.5 miles) on 10 microns SMF
cable
Maximum distance
1550 nmTransmitter wavelength
–2 dBm through 5 dBmAverage launch power
–25 dBm through –24 dBmReceiver sensitivity
LCConnector type
EX-SFP-1FE-FXModel number100Base-FX Fast Ethernet optics
2 km (1.24 miles) on 62.5 microns MMF
cable
Maximum distance
1310 nmTransmitter wavelength
–20 dBm through –14 dBmAverage launch power
–32.5 dBm through –31.5 dBmReceiver sensitivity
LCConnector type
Table 13 on page 23 describes the optical interface support over single-mode
fiber-optic (SMF) and multimode fiber-optic (MMF) cables for XFP transceivers in
EX 3200 and EX 4200 switches.
22 ■ Optical Interface Support—EX 3200 and EX 4200 Switches
Complete Hardware Guide for EX 3200 and EX 4200 Switches