1
Safety information for VHX-5000 Series
96M13026
Safety information for VHX-5000 Series
General Precautions
• Do not use this product for the purpose to protect a human body or a part of human body.
• This product is not intended for use as explosion-proof product. Do not use this product
in a hazardous location and/or potentially explosive atmosphere.
• Check the functionality and performance of this instrument before using it.
• Take any and all safety precautions prior to using the VHX-5000 to prevent potential
damages should it fail.
• KEYENCE makes no warranty against functionality or performance issues arising from
usage outside the standards specified for the VHX-5000, or modifications made to the
VHX-5000.
• Note that the VHX-5000 may not function correctly or may fail to fulfill performance
expectations if used with other devices due to unforeseen operating conditions,
environment, etc. Be sure to confirm these conditions beforehand.
• Do not subject the VHX-5000 or any peripheral devices to sudden temperature changes
which could otherwise lead to condensation.
• Unplug the AC power cord set if the VHX-5000 will not be used for prolonged periods.
Caution
• Be sure to turn the main power switch off when connecting cables or servicing this
instrument. Failure to do so may lead to electric shock.
• Do not bend the power cable with excessive force, or place it under heavy objects. Doing
so may damage the cable and cause fires and electric shock. Do not use if cable is
damaged.
• Do not insert foreign objects. Doing so may result in fires, electric shock, product failure,
and other hazards.
• Never remove the case cover. Touching internal parts with your hands may result in
electric shock.
• The power supply cord set is not provided with the VHX-5000 Series. Use the cord set,
which complies with the regulations and standards in the country or the region in which
the VHX-5000 Series are used. (In North America, use the cord set, which type of cable is
SVT or equivalent, 18AWG or better, rated temperature 90°C or better.)
• When installing the VHX-5000, be sure to connect the protective earthing terminal on the
AC power cable to the protective earthing conductor in the building installation.
Otherwise, electric shock or product damage may result.
• Do not disassemble or modify the VHX-5000. Doing so may result in fires, electric shock,
product failure, and other hazards.
Potentially hazardous optical radiation is emitted from the end of the optical fiber. Do not
stare at this radiation to avoid any damage to your eyes.
To Next Page
Loading...