4-6 Keysight B2961A/B2962A User’s Guide, Edition 3
Front Panel Reference
Display and Assist Keys
Display and Assist Keys
Keysight B2961A/B2962A provides several display modes which depend on the
model as shown below. The display mode is changed by the View key. Pressing the
key changes the mode as shown below.
On B2961A Single Graph (return to Single)
On B2962A Dual Single for channel 1 Single for channel 2 Graph
(return to Dual)
For each display mode, five assist keys are available on the right side of the display.
They are assigned to several softkeys such as Mode, Source, Limit, Measure, and
More. The softkey assignment depends on the display mode.
For details of each display mode and assist keys, see the following sections.
• “Dual View”
• “Single View”
• “Graph View”
• “Status Information”
The status information is common for all display modes. It is displayed above the
bottom softkeys associated with the function keys. This display area is also used to
display system messages and error messages.
To Next Page
Loading...
Need help?
General
