4-44 Keysight B2961A/B2962A User’s Guide, Edition 3
Front Panel Reference
I/O key group
Format (Measure) dialog box
This dialog box provides the following parameters for setting the elements of the
measurement data output.
Voltage Voltage data output, ON or OFF
Current Current data output, ON or OFF
Resistance Resistance data output, ON or OFF
Source Source data output, ON or OFF
Time Time data output, ON or OFF
Status Status data output, ON or OFF
Format (Math) dialog box
This dialog box provides the following parameters for setting the elements of the
math result data output.
Data Result data output, ON or OFF
Time Time data output, ON or OFF
Status Status data output, ON or OFF
Format (Trace) dialog box
This dialog box provides the following parameters for setting the elements of the
trace statistical data output.
Ch Only on 2-channel models. Channel 1 (Ch 1) or 2 (Ch 2)
This field specifies the channel set by this dialog box.
Data Trace data. Selects one from the following data elements.
MEAN Mean value
STD.DEV. Standard deviation
MIN. Minimum value
MAX. Maximum value
PK-PK Peak to peak value
Timestamp Timestamp data format. Selects one from the following
selections.
To Next Page
Loading...
Need help?
General
