5-10 Keysight B2961A/B2962A User’s Guide, Edition 3
Front Panel Operations
To Use Functions other than Measurement
To Enable/Disable the Function to Restore the Trigger
Mode Settings on the Local State
For details on this function, see “Display Preference dialog box” on page 4-48.
1. Press the More > Display > Pref. function keys. The Display Preference dialog
box opens.
2. Set the Restore Trigger Mode on Local field to ON (enable) or OFF (disable).
3. To apply the settings and close the dialog box, press OK.
To cancel the setting change, press the Cancel/Local key.
To Enable/Disable Source/Limit Real Time Update by
Using Digit Pointer and Knob
For details on this function, see “Display Preference dialog box” on page 4-48.
1. Press the More > Display > Pref. function keys. The Display Preference dialog
box opens.
2. Set the Immediate V/I Update by Knob field to ON (enable) or OFF (disable).
3. To apply the settings and close the dialog box, press OK.
To cancel the setting change, press the Cancel/Local key.
To Next Page
Loading...
Need help?
General
