2-20 Keysight B2961A/B2962A User’s Guide, Edition 3
Introduction
Software and Drivers
Software and Drivers
• Keysight B2900A Quick I/V Measurement Software
The B2961A/B2962A includes PC-based Keysight B2900A Quick I/V
Measurement Software. This powerful software makes it easy to quickly setup
and perform I/V measurements and to display the measurement data in a table or
graph without the need to perform any programming. The software allows you
to control up to four channels over a GPIB or LAN connection, or one B2900
via a USB connection.
System requirements:
• Windows 7 (64 bit/32 bit), XP SP3 (32 bit)
• Microsoft .NET framework 4.0 or later
• Keysight IO Libraries 16.0 or later
• Graphical Web Interface
The Graphical Web Interface is a web browser based instrument control panel. It
enables you to set up and perform a measurement easily and quickly from a web
browser using the built-in web server. This allows you to control one instrument
over a LAN connection.
• IVI-C or IVI-COM drivers
Compatible with Windows 7 (64 bit/32 bit), XP SP3 (32 bit) IO Libraries 16.0 or
later. Supports Keysight VEE, Microsoft Visual Studio (Visual Basic, Visual
C++, Visual C#), National Instruments LabWindows and LabVIEW.
• LabVIEW driver (VI)
National Instruments LabVIEW 7.0 or later. LabView drivers are available at
NI.COM.
NOTE For the latest system requirements, go to www.keysight.com/find/b2960a and get
the information.
To Next Page
Loading...
Need help?
General
