Keysight B2961A/B2962A User’s Guide, Edition 3 5-29
Front Panel Operations
To Use Program Memory
To Use Program Memory
This section describes how to select and run a memory program. For details on this
function, see “Program Memory” on page 6-24.
See also “Program key group” on page 4-41.
• “To Select a Program”
• “To Control Program Operation”
To Select a Program
1. Press the More > Program > Catalog function keys.
The Program Catalog dialog box opens.
2. Highlight the name of the memory program to run.
3. Press OK.
NOTE To set a value for a variable used in the memory program, use the Variable dialog
box. For details, see “Program key group” on page 4-41.
To Control Program Operation
1. Press the More > Program > Control function keys.
2. Use the following keys to control the operation of a memory program.
Run Starts the execution of the specified memory program.
Pause Pauses the execution of the memory program.
Step Starts the step execution of the specified memory program.
Stop Stops the execution of the memory program.
Continue Continues the execution of the memory program presently
paused.
To Next Page
Loading...
Need help?
General
