Keysight B2961A/B2962A User’s Guide, Edition 3 4-9
Front Panel Reference
Display and Assist Keys
AMPS (I) sets the current measurement.
VOLTS (V) sets the voltage measurement.
OHMS (R) sets the resistance measurement.
WATTS (P) sets the power measurement.
%LIMIT (%) sets the percent-to-Limit measurement.
Resistance data is given by Resistance=Vmeas/Imeas.
Power data is given by Power=VmeasImeas.
In the above formula, Vmeas is the voltage measurement data,
and Imeas is the current measurement data.
For details on using resistance compensation, see “Resistance
Compensation” on page 6-18.
More... Changes the assist keys to Ch 1 assist keys or Ch 2 assist keys.
Ch 1 assist keys are effective for channel 1. Ch 2 assist keys are
effective for channel 2.
To Next Page
Loading...
