Keysight B2961A/B2962A User’s Guide, Edition 3 6-45
Function Details
Initial Settings
Table 6-12 Other Non-volatile Settings
Setup item Factory default setting
Channel grouping “1” for 1-ch models
“1,2” for 2-ch models
Remote display Enabled
Display color set 1
Beeper Enabled
Graphical web interface (web server) Enabled
Power-on program Not set
Line frequency 50 Hz
Fan control mode Normal
V/I Limit for each polarity OFF
Immediate V/I update by knob OFF
Restore trigger mode on Local OFF
External output filter state OFF
External output filter type ULNF (ultra low noise filter)
To Next Page
Loading...
