1-16 Keysight B2961A/B2962A User’s Guide, Edition 3
Getting Started
Operation Summary
Table 1-9 System Setup and Operations
To enable/disable Media Transfer Protocol
for easy file access
I/O > USB function keys
To see status of USB interface I/O > USB function keys
To set GPIB address I/O > GPIB function keys
To see status of GPIB interface I/O > GPIB function keys
To set configuration of Digital I/O I/O > DIO > Config function keys
To read/write a value set to Digital I/O I/O > DIO > R/W function keys
Task Relevant front panel key
To set power line frequency System > PLC function keys
To return to the factory shipment
condition
System > More > Factory function keys
To apply initial settings System > Reset function keys
To perform self-calibration System > Cal/Test > Self-Cal function keys
To perform self-test System > Cal/Test > Self-Test function keys
To check errors System > Error > Log function keys
To clear error log System > Error > Clear function keys
To clear time stamp System > Timestamp > Clear function keys
To set automatic clear of time stamp System > Timestamp > Auto CLR function keys
To set start-up operation System > More > Start-up function keys
To enable/disable beep and sound System > More > Sound function keys
To enable/disable the function to restore
the trigger mode settings on the local state
Display > Pref. function keys
To set date and time System > More > Info. > Date/Time function keys
To perform firmware update System > More > Info. > Update > Firmware function keys
To perform demonstration System > More > Info. > Demo. function keys
Task Relevant front panel key
To Next Page
Loading...
Need help?
General
