12 Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide
Chart Logic Bus Timing / 94
Chart Logic Bus State / 95
5 Reference Waveforms
To save a waveform to a reference waveform location / 97
To display a reference waveform / 98
To scale and position reference waveforms / 99
To adjust reference waveform skew / 99
To display reference waveform information / 100
To save/recall reference waveform files to/from a USB storage
device / 100
6 Digital Channels
To connect the digital probes to the device under test / 101
Probe cable for digital channels / 102
Acquiring waveforms using the digital channels / 105
To display digital channels using AutoScale / 105
Interpreting the digital waveform display / 106
To change the displayed size of the digital channels / 107
To switch a single channel on or off / 108
To switch all digital channels on or off / 108
To switch groups of channels on or off / 108
To change the logic threshold for digital channels / 108
To reposition a digital channel / 109
To display digital channels as a bus / 110
To Next Page
Loading...
