Save/Recall (Setups, Screens, Data) 18
Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide 259
You can also configure the [Quick Action] key to save setups, screen images, or
data. See "Configuring the [Quick Action] Key" on page 291.
To save setup files
Setup files can be saved to one of 10 internal (\User Files) locations or to an
external USB storage device.
1 Press [Save/Recall] > Save > Format; then, turn the Entry knob to select Setup
(*.scp).
2 Press the softkey in the second position and use the Entry knob to navigate to
the save location. See "To navigate storage locations" on page 264.
3 Finally, press the Press to Save softkey.
A message indicating whether the save was successful is displayed.
Setup files have the extension SCP. These extensions appear when using the File
Explorer (see "File Explorer" on page 279), but they do not appear when using the
Recall Menu.
To save BMP or PNG image files
Image files can be saved to an external USB storage device.
1 Press [Save/Recall] > Save > Format; then, turn the Entry knob to select 8-bit
Bitmap image (*.bmp), 24-bit Bitmap image (*.bmp), or 24-bit image (*.png).
2 Press the softkey in the second position and use the Entry knob to navigate to
the save location. See "To navigate storage locations" on page 264.
3 Press the Settings softkey.
In the File Settings Menu, you have these softkeys and options:
• Setup Info — setup information (vertical, horizontal, trigger, acquisition, math,
and display settings) is also saved in a separate file with a TXT extension.
• Invert Grat — the graticule in the image file has a white background instead of
the black backgound that appears on-screen.
To Next Page
Loading...
Need help?
General
