312 Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide
22 Reference
Because the 2000 X-Series oscilloscopes do not have a ring around the BNC
connector for identifying probes, you must set the probe attenuation factor
manually. See "Setting Analog Channel Probe Options" on page 65.
See Also For more information on probes and accessories, see www.keysight.com for:
• Probes and Accessories Selection Guide (5989-6162EN)
• InfiniiVision Oscilloscope Probes and Accessories Selection Guide Data Sheet
(5968-8153EN)
• For compatibility information, manuals, application notes, data sheets,
selection guides, SPICE models, and more for oscilloscope probes, see the
Probe Resource Center at: www.keysight.com/find/PRC
Loading Licenses and Displaying License Information
License files are loaded from a USB storage device using the File Explorer (see
"File Explorer" on page 279).
License information is displayed with other oscilloscope information (see "To
display oscilloscope information" on page 290).
For more information about the licenses and other oscilloscope options available,
see:
• "Licensed Options Available" on page 312
• "Other Options Available" on page 314
• "Upgrading to an MSO" on page 314
Licensed Options Available
Many of the following licensed options can be easily installed without returning
the oscilloscope to a Service Center. Not all options can be installed on all
models. See data sheets for details.
Table 4 Licensed Options Available
License Description After purchase model number, notes
D2000AUTA/B Automotive Software for 2000 X-Series
Replaces licenses AUTO and MASK.
Order D2000AUTA/B (replaces DSOX2AUTO
and DSOX2MASK).
To Next Page
Loading...
Need help?
General
