Keysight Technologies InfiniiVision 2000 X Series User Manual

Measurements 14
Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide 207
Snapshot All
The Snapshot All measurement type displays a popup containing a snapshot of all
the single waveform measurements.
"Negative Pulse Count" on
page 222
"Overshoot" on page 210
"Peak-Peak" on page 209 Yes
"Period" on page 216 Yes
"Phase" on page 219 Measures between two sources.
Press Settings to specify the second
source.
"Preshoot" on page 212
"Rise Time" on page 218
"DC RMS" on page 213
"AC RMS" on page 213
"Top" on page 209
"+ Width" on page 217 Yes
"– Width" on page 217 Yes
"X at Max Y" on page 221 Yes The resultant units are in Hertz.
"X at Min Y" on page 221 Yes The resultant units are in Hertz.
*
Use the cursors to make other measurements on FFT.
Measurement Valid
for
Math
FFT
*
Valid for
Digital
Channels
Notes

Keysight Technologies InfiniiVision 2000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 2000 X Series
Category	Test Equipment
Language	English