Keysight Technologies InfiniiVision 2000 X Series User Manual

Math Waveforms 4
Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide 95
Chart Logic Bus State
The Chart Logic Bus State function (available with the PLUS license) displays bus
data values, sampled on a clock signal's edge, as an analog waveform (like a D/A
conversion).
Use the Clock softkey to select the clock signal.
Use the Slope softkey to select the edge of the clock signal to be used.
Use the More Chart softkey to open a submenu for specifying the analog value
equivalent of each bus value increment, the analog equivalent of a zero bus value,
and the type of values the charted bus data represents (volts, amps, etc.).
Use the Units/Code softkey to specify the analog value equivalent of each
increment in the bus data value.
Figure 19 Example of Chart Logic Bus State

Keysight Technologies InfiniiVision 2000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 2000 X Series
Category	Test Equipment
Language	English