Keysight Technologies InfiniiVision 2000 X Series User Manual

Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide 9
Contents
InfiniiVision 2000 X-Series Oscilloscopes—At a Glance / 4
In This Guide / 6
1 Getting Started
Inspect the Package Contents / 23
Install the Optional LAN/VGA or GPIB Module / 26
Tilt the Oscilloscope for Easy Viewing / 26
Power-On the Oscilloscope / 27
Use only the power cord that came with the oscilloscope / 28
Connect Probes to the Oscilloscope / 28
Maximum input voltage at analog inputs / 29
Do not float the oscilloscope chassis / 29
Input a Waveform / 29
Recall the Default Oscilloscope Setup / 30
Use Auto Scale / 30
Compensate Passive Probes / 32
Learn the Front Panel Controls and Connectors / 33
Front Panel Overlays for Different Languages / 39
Learn the Rear Panel Connectors / 41
Learn the Oscilloscope Display / 43

Keysight Technologies InfiniiVision 2000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 2000 X Series
Category	Test Equipment
Language	English