Keysight Technologies InfiniiVision 2000 X Series User Manual

298 Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide
21 Web Interface
Browser-Based Remote Front Panel
To operate the oscilloscope using the web interface's Browser-Based Remote
Front Panel:
1 Access the oscilloscope's web interface (see "Accessing the Web Interface" on
page 296).
2 When the oscilloscope's web interface is displayed, select Browser Web Control,
then select Remote Front Panel. After a few seconds the Remote Front Panel
appears.
3 Click keys or knobs that you would normally press on the oscilloscope's front
panel. Buttons have been added for turning knobs.
Remote Programming via the Web Interface
NOTE
If Java is not installed on your PC, you will be prompted to install the Sun Microsystems Java
Plug-in. This plug-in must be installed on the controlling PC for the web interface's Remote
Programming operations.

Keysight Technologies InfiniiVision 2000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 2000 X Series
Category	Test Equipment
Language	English