Keysight M8195A - Page 120

3 Sequencing
120 Keysight M8195A Revision 2 – Arbitrary Waveform Generator User’s Guide
Table 18: Mapping external inputs to logical functions
Functions
Inputs
Trigger/Gate Input
(SMA Connector)
Trigger
Generator
Event Input
(SMA Connector)
Software
Trigger/Gate
Default
Enable (= Start in armed
mode)
Default (Armed)
Advancement Event
Default
Dynamic Select
Default
RUN
The software controls are logically ored with the external input.
Dynamic control inputs are only available, when using the M8197A. Then in case of
the dynamic control, the software controls have precedence unless the hardware
inputs are explicitly disabled using the commands.
See also chapter Trigger Tab.