MAT89600
One file contains waveform samples as float values in the range -1..+1. It is a 89600
VSA recording file in MATLAB binary format (mat) without markers. Only MATLAB
level 4.0 and 5.0 files without compression are supported.
MATLAB binary files with one, two, three or four columns are supported. In the case
of complex I/Q data one column consists of the I and the Q data. If the MATLAB file
consists of one column, the data can be imported to channel 1, 2, 3, or 4. If it
consists of multiple columns the handling is similar to the CSV case, see Table 47
and Table 48.
The header variable ‘XDelta’ (1/XDelta) is used to set the sample frequency.
DSA90000
One file contains waveform samples for one M8195A channel. The waveform samples
can be imported to any of the four M8195A channels.
DSA90000 waveform file in binary format (.bin) containing header and floating point
data (without markers). Only waveform type ‘Normal’ is supported. If the file contains
more than one waveform only the first waveform will be imported.
To Next Page
Loading...
