Keysight M8195A - Page 96

2 M8195A User Interface
96 Keysight M8195A Revision 2 – Arbitrary Waveform Generator User’s Guide
The following two tables show the standard column-to-channel mapping for the case of
no additional data header in the CSV file or no reordering of the column names in the
MAT89600 file.
Table 14: Standard column-to-channel mapping in four-channel mode
Number of columns in
file for real values
Import and download to M8195A, when corresponding
channel box is checked
1.
Column 1 to Ch 1 and Ch 2 and Ch 3 and Ch4
2.
Column 1 to Ch 1 and Column 2 to Ch 2
3.
Column 1 to Ch 1 and Column 2 to Ch 2 and Column 3 to
Ch 3
4.
Column 1 to Ch 1 and Column 2 to Ch 2 and Column 3 to
Ch 3 and Column 4 to Ch 4
Table 15: Standard Column to channel mapping in two-channel mode
Number of columns in
file for real values
Import and download to M8195A, when corresponding
channel box is checked
1.
Column 1 to Ch 1 and Ch4
2.
Column 1 to Ch 1 and Column 2 to Ch 4
3.
Column 1 to Ch 1 and Column 2 to Ch 4, Column 3 is ignored
4.
Column 1 to Ch 1 and Column 2 to Ch 4, Column 3 and 4 are
ignored
For MAT89600 file and CSV file with data header, the mapping shown below applies:
Table 16: Modified column-to-channel mapping in four-channel mode
Name of column
Import and download to M8195A, when corresponding
channel box is checked
Y1
Ch 1
Y2
Ch 2
Y3
Ch 3
Y4
Ch 4
Table 17: Modified column-to-channel mapping in two-channel mode
Name of column
Import and download to M8195A, when corresponding
channel box is checked
Y1
Ch 1
Y2
Ch 4
Y3
ignored
Y4
Ch 4, if Y2 is not present; ignored, if Y2 is present