KIP 2080 - Page 162

A75UM3EG (Ver. E.2)
3-117
10) Push the Start Key when no original is set to the
scanner.
The scanned image data is printed out in the selected
way of sort.
The Set Copy Mode is cancelled automatically, and
the LED lamp of the Set Copy Key is put out at the
time you push the Start Key.
Note : Since the image data is stored in the memory as the Set Copy Job even after printing
out, it is possible to do several edits such as “Delete”, “Insert”, “Replace”, “Re-edit”
and “All Cancel” of the Edit Function.
As for the Edit Function, refer to “Edit Function” on the page 3-129.
[How to cancel the Set Copy Mode]
There are 3 ways to cancel the Set Copy Mode.
1. If you print out the stored Set Copy Job normally pushing the Start Key, the Set Copy Mode is
automatically cancelled.
2. If you have never scanned any original since you had entered the Set Copy Mode, it is possible
to cancel it pushing the Set Copy Key again.
3. If you wish to give up for Set Copy although you have scanned some originals, cancel the Set
Copy Mode by “All Cancel”.
As for the All Cancel, refer to the page 3-141.
[How to cancel the Sort Mode]
Select the “Sort a.” to cancel the Sort Mode.
STOP/
EJECT
START
789
456
123
0. C
/R
/L
b.
0%
001
1
2
3
3
2
1
3
2
1
3
2
1
a.
1
2
3
1
2
3
1
2
3
c.
1
1
1
2
2
2
3
3
3
d.
3
3
3
2
2
2
1
1
1
Scan Print(Sort)
Back