Instructions for work
Precision Seed Drills
MAXIMA 2
101
Adjusting the selector
The selector enables preventing misses and doubles
along the seeding line.
Pre-setting:
- Position selector (1) on the teeth bottom on the
notched quadrant (2).
- Pull knob (3) to place selector (1) on the
recommended position.
The selector adjustment must be made after
having installed the disks best adapted to the
seed variety to sow.
Plate (2) is graduated from 0 to 30.
Recommended
adjustment range
Position of 1st
running test
Maize 15 to 25 21
Sunflower 10 to 16 14
Beet 18 to 25 21
Settings are only indicated for your
information.
The seeding unit setting must be adjusted
according to the sowing conditions (Work
speed and soil nature).
It is indispensable to refine the adjustments
when starting the machine and every time the
seed variety or type changes.
To Next Page
Loading...
