KUHN MAXIMA 2 - General Technical Specifications

Machine specifications
Precision Seed Drills
MAXIMA 2
31
2. General technical specifications
Maxima 2
Single bar frame exceeding 4.40 m
Attachment type
Semi-automatic attachment category 2
Category 3 linkage
PTO speed 540 min
-1
Unit hopper capacity 52 L (3 US gal)
Minimum PTO power requirement
- When starting the PTO
-At work
8.2 kW (11 ch) (approximately)
4.4 kW (6 ch) (approximately)
Torque
- When starting the PTO
-At work
From 12 to 15 daN m (88 - 110 lbf ft)
From 8 to 9 daN m (59 - 66 lbf ft)
Tyre pressure
-5 x 15
- 6.5 x 15
-26 x 12
1.7 bar (24 psi)
2.7 bar (39 psi)
1.4 bar (20 psi)