KUHN MAXIMA 2 - Blower; Control Units

Precision Seed Drills
14
MAXIMA 2
Identification of the machine
 Blower
 Control units
 Kit no. N00848B0: Distribution disk 48 holes of diameter 3.5 mm (0.14’’) AP.
 Kit no. N04305B0: Distribution disk 48 holes of diameter 4.5 mm (0.18’’) AP.
 Kit no. N1503130: Distribution disk 48 holes of diameter 5.5 mm (0.22’’) AP.
 Kit no. N1500061: Distribution disk 54 holes of diameter 3 mm (0.12’’) SP.
 Kit no. N1500681: Distribution disk 54 holes of diameter 4.5 mm (0.18’’) AP.
 Kit no. N1500691: Distribution disk 54 holes of diameter 5.5 mm (0.22’’) AP.
 Kit no. N1500431: Distribution disk 70 holes of diameter 1.25 mm (0.05’’) SP.
 Kit no. N02851B0: Distribution disk 70 holes of diameter 2.5 mm (0.1’’) AP.
 Kit no. N04342B0: Distribution disk 70 holes of diameter 3.5 mm (0.14’’) AP.
 Kit no. N00850B0: Distribution disk 70 holes of diameter 4.5 mm (0.18’’) AP.
 Kit no. N1502170: Distribution disk 80 holes of diameter 2.5 mm (0.1’’) AP.
 Kit no. N1501591: Distribution disk 80 holes of diameter 3.5 mm (0.14’’) AP.
 Kit no. N1501051: Distribution disk 100 holes of diameter 0.8 mm (0.03’’) SP.
 Kit no. N00849B0: Distribution disk 100 holes of diameter 1.25 mm (0.05’’) SP.
 Kit no. N1500701: Distribution disk 100 holes of diameter 1.75 mm (0.07’’) AP.
 Kit no. N04293B0: Distribution disk 100 holes of diameter 3.5 mm (0.14’’) AP.
 Kit no. 1677287: 470 min
-1
pulley and belt unit
 Kit no. 1676731: 870 min
-1
pulley and belt unit
 Kit no. 1676738: 1000 min
-1
pulley and belt unit
 Kit no. 1676730: Rear PTO output stub.
 Kit no. 1677223: Vacuometer.
 Kit no. 1676822: HECTOR 3000 electronic unit.
Passage control box kit KMS208:
 Kit no. 1676648: For machine with 8 rows.
Sowing control box kit KMS412:
 Kit no. 1676408B: For machine with 8 rows.