Precision Seed Drills
200
MAXIMA 2
Maintenance and storage
Seeding units
Check all working parts for proper alignment to the
sowing row (Coulters, clod-clearers, opener disks and
rear rollers).
- Also check that all sections are equidistant.
- The correct positioning of the seed transfer ducts on
the welded chassis and the proper condition inside
and at the bottom part.
Tyre pressure
- Tyres 5 x 15: 1.7 bar (24 psi).
- Tyres 6.5 x 15: 2.7 bar (39 psi).
- Tyres 26 x 12: 1.4 bar (20 psi).
Fixing elements
- Check wheelnut tightness:
• Torque: 10 daN m (74 lbf ft).
Tire pressure has a direct effect on the
required sowing density.
A 1 bar (14 psi) low pressure can generate up
to 3 % additional population.
To Next Page
Loading...
