Instructions for work
Precision Seed Drills
MAXIMA 2
77
Adjusting the sowing depth
Handle (1) enables adjusting the sowing depth.
Adjustment:
Refer to the decal applied on the machine to determine
handle (1) setting position.
Example:
To adjust the sowing depth at 4.5 cm (1.77’’), place
adjustment handle in position D-E.
- Repeat procedure on each seeding unit.
The sowing depth can be adjusted from 0 to
8.5 cm (0’’ - 3.34’’) (approximately).
Settings are only indicated for your
information.
The seeding unit setting must be adjusted
according to the sowing conditions (Soil
preparation and nature).
The marking enables identical setting of each
seeding unit.
To Next Page
Loading...
