Precision Seed Drills
68
MAXIMA 2
Putting into service
Uncoupling the machine
For attachment category 2:
- Remove lynch pin (1) and pin (2).
- Lower parking stand (3).
- Insert pin (2) and lock using lynch pin (1).
- Repeat procedure on the other parking stand.
- Lower the tractor three-point linkage to rest the
machine on the ground.
- Uncouple and place PTO shaft in support (1).
- Disconnect and store hydraulic hoses in holder (2).
- Disconnect and store control boxes in a dry and clean
place.
- Detach the top link from the machine end.
Park the machine on an even fairly level
ground.
To Next Page
Loading...
