Maintenance and storage
Precision Seed Drills
MAXIMA 2
207
Sowing monitoring units
The sowing control cell (1) must be close to the
distribution disk.
5. Storage
At the end of each season
- Clean the machine with a spray gun.
- touch up any areas of damaged paintwork.
- Put the machine under cover in a dry place.
- Position wedges underneath wheel arms to take load
off the tires.
- Store controls boxes in a dry place free of dust.
- Empty hoppers.
- Lubricate the whole machine.
- Check the operation of the doors and metering flaps.
The cover must be correct without any possibility
of the cell moving to the right.
To Next Page
Loading...
