Optional equipment
Precision Seed Drills
MAXIMA 2
133
Adjusting the spacing between the press
wheels
- Remove nut (1).
- Remove the struts (2).
- Remove wheel (3).
- Place one or several spacers (1) on the inside to
increase spacing between the press wheels.
- Place one or several spacers (1) on the outside to
reduce spacing between the press wheels.
- Reinstall nut (1).
Repeat procedure on the other press wheel.
For standard 1 and 2’’ rubber V rollers, spacer
(1) must remain on the inside to prevent
interferences with the press wheels.
To Next Page
Loading...
