Precision Seed Drills
104
MAXIMA 2
Instructions for work
Adjusting the seed flow
When sowing fluid seeds (sunflower, rapeseed...) on
slopes or stony grounds, there is a risk of overpopulation
dues to overflow. The reduction spacer may have to be
adjusted.
- Loosen the butterfly nut (1).
• Lift output reduction spacer lever (1) to reduce the
seed supply to the disks.
• Lower output reduction spacer lever (1) to increase
the seed supply to the disks.
- Tighten the wing nut.
- Repeat procedure on each seeding unit.
To Next Page
Loading...
