Optional equipment
Precision Seed Drills
MAXIMA 2
119
Machine use
In very wet, sticky or stony conditions, the clod clearer
and coulter can be folded upwards or the equipment can
be removed from the seed drill.
2. Spring assisted clod clearer
Kit no. 1676803
The clod clearer is used to clear clods and small stones
to prepare for the passage of the lateral gauge wheels
and create a furrow in humid soil after having pushed
away the dry and clody part.
Adjustments
Height adjustment
- Loosen screws (1).
- Set the required height:
• Clod clearer (2) must be set high enough to prevent
seeding unit from engaging in the soil.
• The independent knife coulter (3) enables preparing
the passage for the coulter and facilitates its
engagement in the soil.
- Tighten screws (1).
We recommend adjusting the clod clearer at
approximately 20 mm (0.78’’) from the ground.
To Next Page
Loading...
