Putting into service
Precision Seed Drills
MAXIMA 2
57
3. Coupling and uncoupling
Description of coupling elements
The machine is equipped with:
- 1 PTO shaft 1 3/8’’ - 6 splines.
- 1 3-pin socket.
- 1 7-pin plug for the signalling equipment.
- 2 hydraulic hoses to supply the side marker cylinders.
Preparing the tractor
The machine is for use with tractors equipped with a
standard category 2 or 3 3-point hitch.
The tractor must be fitted with a double acting hydraulic
outlet.
When optional equipment is used, follow
specific procedures mentioned in the related
section: Filling auger.
To Next Page
Loading...
