Precision Seed Drills
122
MAXIMA 2
Optional equipment
Working width adjustment
The working width can be adjusted to 3 different
positions.
- Remove nut (1).
- Place star-shaped disks (2) in the required position:
• By moving the star-shaped disks (2) frontwards,
organic residues are more easily separated.
• By moving the star-shaped disks (2) rearwards, the
clearing width is increased prior to the passage of
the gauge wheels.
- Reinstall nut (1).
Repeat procedure on the other disk.
The working width must be adjusted according to
the type of residues to push aside.
The pointed part (1) of the teeth must always
be pointing frontwards in the lower part of
the star-shaped disks.
Adjust all seeding units to the same settings.
To Next Page
Loading...
