Precision Seed Drills
208
MAXIMA 2
Maintenance and storage
At the start of each season
- Read through the operator's manual again.
- Check that all nuts and bolts are sufficiently tightened.
- Make sure that all protection devices are in place and
in good condition.
- Check that the lighting equipment is clean.
- Check tyre pressure.
- Check the condition of the hydraulic hoses.
- Check the condition and setting of the belts.
To preserve the assembly's mobility and self-
aligning feature, nuts (1) and (2) on each
sowing unit must not be locked.
To Next Page
Loading...
