Instructions for work
Precision Seed Drills
MAXIMA 2
111
Checking
Seeding depth
It is recommended to check sowing depth every time you
refill the different hoppers.
Sowing depth must be matched to the type of seed, the
soil and conditions in the seed bed.
A insufficient or excessive depth can harm the
emergence quality.
On plots with variable quality soil, the depth setting must
be checked and adjusted so as to obtain the correct
sowing depth across the whole area of the field.
Distribution
During filling, rotate drive wheel by hand to check the
good seed distribution underneath each sowing unit.
Seed application rate
Check and compare the seed quantity used in relation to
the adjustments and the area sown.
For each filling, compare residual seed quantity in each
hopper. A variation of the residual seed volume in the
hopper indicates there is a problem in the sowing unit
setting or that the sowing unit is clogged. Search source
of malfunction and remedy the problem prior to resuming
sowing operation.
To Next Page
Loading...
