2KJ/2KH-1
1-3-4
Mode setting
U264 Setting the display order of the date MONTH-DATE-YEAR (inch)
DATE-MONTH-YEAR (metric)
U265 Setting OEM purchaser code 0
*1
U277 Setting auto application change time 30
*1,*2
U285 Setting service status page ON
*1
U326 Setting the black line cleaning indication ON
*1,*2
U332 Setting the size conversion factor 1.0/1.0/1.0
*1,*2
U341 Specific paper feed location setting for printing function -
U342 Setting the ejection restriction ON
*1,*2
U343 Switching between duplex/simplex copy mode OFF
*1,*2
U344 Setting the low-power mode ENERGY STAR (inch)
*1,*2
GEEA (metric)
*1,*2
U345 Setting the value for maintenance due indication 0
*1,*2
Image
processing
U402 Adjusting margins of image printing 3.0/3.0/4.0
*1
U403 Adjusting margins for scanning an original on the platen 2.0/3.0/2.0/2.0
*1
U404 Adjusting margins for scanning an original from the DP 2.0/3.0/2.0/2.0
*1
U407 Adjusting the leading edge registration for memory image
printing
0.0
*1
Network
scanner
U504 Initializing the scanner NIC -
U506 Setting the time out 10
*1,*2
Others U901 Checking copy counts by paper feed locations -
U903 Checking/clearing the paper jam counts -
U904 Checking/clearing the service call counts -
U905 Checking counts by optional devices -
U906 Resetting partial operation control -
U908 Checking the total counter value -
U910 Clearing the black ratio data -
U911 Checking/clearing copy counts by paper sizes -
U917 Setting backup data reading/writing -
U920 Checking the copy counts -
U925 Checking/clearing the system error counts -
U926 Rewriting FAX program -
U927 Clearing the all copy counts and machine life counts (one
time only)
-
U928 Checking machine life counts -
U931 Setting the automatic toner install OFF
*1
U941 Setting the default magnification ratio of the default cassette 100%
*1,*2
U942 Setting of deflection for feeding from DP 0/0
*1
U969 Checking of toner area code -
U990 Checking/clearing the time for the exposure lamp to light -
U991 Checking the scanner count -
U993 Outputting a VTC-PG pattern -
Section Item
No.
Content of maintenance item Initial
setting*
*Initial setting for executing U020, *1: The item initialized for executing U020, *2: The item initialized for executing U021
To Next Page
Loading...
