Kyocera TASKalfa 255 - Scanning Using TWAIN

6-45
Sending > Scanning using TWAIN
Scanning using TWAIN
This section explains how to scan an original using TWAIN.
The procedure for scanning using the TWAIN driver is explained as an example. The WIA driver is used in the same
way.
1
Display the window.
1 Activate the TWAIN compatible application.
2 Select the machine using the application and display the TWAIN dialog box.
2
Configure the function.
Select scanning settings in the TWAIN dialog box that opens.
The settings that appear in the TWAIN dialog box are as follows.
NOTE
For selecting the machine, see the Operation Guide or Help for each application software.
Item Detail
Original
Configurations
Original Size Select the scan size of the original.
Original
Orientation
Specify the type of binding.
Send
Configurations
Duplex Setting Specify whether the original is one-sided or two-sided.
Image Quality
Configurations
Color Setting Select the color mode.
Resolution Select the resolution.
Image Quality Select the image quality according to the type of original.
Image Quality
Settings
Density Select the exposure.
Select the Auto button to have the exposure set
automatically based on the original.
Prevent Bleed-
through
Hide background colors and image bleed-through when
scanning thin original.