Kyocera TASKalfa 255 - Connecting USB Cable; Connecting the Power Cable

2-11
Preparation before Use > Connecting Cables
Connecting USB Cable
The equipment can be connected with a USB cable and used as a printer or scanner in an environment where there is
no network.
1
Power Off.
2
Connect the machine.
1 Connect the USB cable to the appropriate interface located on the left side of the body.
2 Connect the other end of the cable to the PC.
Connecting the Power Cable
Connect one end of the supplied power cable to the machine and the other end to a power
outlet.
IMPORTANT
Only use the power cable that comes with the machine.
Check that the indicators are off.