9-21
Setup, Registration, and User Management > System Menu
Interface Block Setting
This allows you to protect this machine by blocking the interface with external devices such as USB hosts or optional
interfaces.
RAM Disk Setting
Memory Balance
Date/Timer
Configures settings related to the date and time.
Item Description
USB Host This locks and protects the USB memory slot (A1) or USB port (A2) (USB host).
Value: Unblock, Block
USB Device This locks and protects the USB interface connector (B1) (USB Device).
Value: Unblock, Block
Optional Interface 1
Optional Interface 2
This locks and protects the optional interface slots (OPT1 or OPT2).
Value: Unblock, Block
Item Description
RAM Disk Setting When optional memory is installed, a RAM disk can be created and its size can be set.
Creating a RAM disk makes it possible to print from a Job Box.
Value
RAM Disk Setting: Off, On
RAM Disk Size: Setting range varies with memory balance settings.
Item Description
Memory Balance When optional memory is installed, select the memory allocation scheme based on the
application in which you are using the equipment.
Value: Printer function, Multi job, Copy function
Item Description
Date/Timer Set the date and time for the location where you use the machine. If you perform Send as E-
mail, the date and time set here will be displayed on the header.
Value: Year (2000 to 2037), Month (1 to 12), Day (1 to 31), Hour (00 to 23), Minute (00 to 59),
Second (00 to 59)
Date Format Select the display format of year, month, and date. The year is displayed in Western notation.
Value: Month/Day/Year, Day/Month/Year, Year/Month/Day
Time Zone Set the time difference from GMT. Choose the nearest listed location from the list.
Auto Panel Reset If no jobs are run for a certain period of time, automatically reset settings and return to the
default setting. Select to use Auto Panel Reset or not.
Value: Off, On
The time allowed to elapse before the panel is reset is set with the Panel Reset Timer.
Auto Sleep Set Auto Sleep to automatically enter Sleep Mode after a period of inactivity.
Value: Off, On
Refer to Sleep and Auto Sleep on page 2-21 for Sleep.
The time allowed to elapse until the auto sleep function is activated is set with the Sleep
Timer.
To Next Page
Loading...
