10-18
Troubleshooting > Responding to Error Messages
W
Responding to Send Error
Error Message Checkpoints Corrective Actions Reference
Page
Warning low memory. — Job cannot be started. Try again later. —
Error
Code
Error Message Corrective Actions Reference
Page
1101 Failed to send the e-mail. Check the host name of the SMTP server on the COMMAND
CENTER.
2-24
Failed to send via FTP. Check the host name of FTP.
Failed to send via SMB. Check the host name of SMB.
1102 Failed to send via SMB. Check the SMB settings.
• Login user name and login password
NOTE: If the sender is a domain user, specify the domain
name.
• Host name
•Path
6-19
Failed to send the e-mail. Check the followings on the COMMAND CENTER.
• SMTP login user name and login password
• POP3 login user name and login password
Failed to send via FTP. Check the FTP settings.
• Login user name and login password
NOTE: If the sender is a domain user, specify the domain
name.
•Path
• Folder share permissions of the recipient
1103 Failed to send via SMB. Check the SMB settings.
• Login user name and login password
NOTE: If the sender is a domain user, specify the domain
name.
•Path
• Folder share permissions of the recipient
6-19
Failed to send via FTP. Check the FTP settings.
•Path
• Folder share permissions of the recipient
1104 Failed to send the e-mail. Check the e-mail address.
NOTE: If the address is rejected by the domain, you cannot
send the e-mail.
6-18
1105 Failed to send via SMB. Select [On] of the SMB settings on the COMMAND CENTER. 2-24
Failed to send the e-mail. Select [On] of the SMTP settings on the COMMAND CENTER.
Failed to send via FTP. Select [On] of the FTP settings on the COMMAND CENTER.
1106 Failed to send the e-mail. Check the sender address of SMTP on the COMMAND
CENTER.
2-24
1131 Failed to send via FTP. Select [On] of the secure protocol settings on the COMMAND
CENTER.
2-24
To Next Page
Loading...
