Kyocera TASKalfa 255 - Finish the Installation

2-15
Preparation before Use > Installing Software
3
Install using Express Mode.
1 Select the print system to be installed.
2 Customize the print system name if the print system is connected via a network.
3 Start installing.
4
Finish the installation.
This completes the printer driver installation procedure. Follow the on-screen instructions to
restart the system, if required.
A TWAIN driver can be installed if the machine and computer are connected via a network.
If you are installing a TWAIN driver, continue by configuring the TWAIN driver.
NOTE
The machine cannot be detected unless it is on. If the computer fails to detect the machine,
verify that it is connected to the computer via a network or USB cable and that it is turned on
and click Reload.
If the Windows security window appears, click Install this driver software anyway.
1
2
3
1
2