9-20
Setup, Registration, and User Management > System Menu
Enhanced WSD
Enhanced WSD (SSL)
IPSec
Secure Protocol
LAN Interface
Item Description
Enhanced WSD Set whether to use Kyocera’s proprietary web services. Selecting [Off] will disable some KMnet
Viewer functionality as well as the WIA and TWAIN drivers.
NOTE: For more information about which KMnet Viewer functionality will be disabled, refer
to the KMnet Viewer User Guide.
Value: Off, On
Item Description
Enhanced WSD (SSL) Set whether to use Kyocera’s proprietary web services over SSL.
Value: Off, On
Item Description
IPSec Make this setting when you use IPSec.*
Value: Off, On
* After changing the setting, restart the system or turn the machine OFF and then ON again.
Item Description
SSL Select whether or not to use SSL.*
Value: Off, On
* After changing the setting, restart the system or turn the machine OFF and then ON again.
IPP Security Select the IPP security level. This setup is available when SSL is [On].*
Value: IPP/IPP over SSL, IPPoverSSL only
HTTP Security Select the HTTP security level. This setup is available when SSL is [On].*
Value: HTTP/HTTPS, HTTPS Only
LDAP Security (Address Book)
LDAP Security (User)
Select the type of encryption according to the type of security employed by the LDAP server.
This setup is available when SSL is [On].*, **
Value: Off, LDAPv3/TLS, LDAP over SSL
** LDAP must be set to [On] in Protocol Detail on page 9-18.
Item Description
LAN Interface Specify the settings for the LAN interface to be used.*
Value: Auto, 10Base-Half, 10Base-Full, 100Base-Half, 100Base-Full, 1000BASE-T
* After changing the setting, restart the system or turn the machine OFF and then ON again.
To Next Page
Loading...
