9-19
Setup, Registration, and User Management > System Menu
NetWare
AppleTalk
WSD Scan
WSD Print
HTTPS Select whether or not to communicate using HTTPS. SSL must be set to [On] in SSL on page
9-20.*
Value: Off, On
IPP Select whether or not to communicate using IPP. When selecting [On], set the IPP default Port
Number. Use the IPP default port 631.*
Value: Off, On, Port 1 - 65535
IPP over SSL Select whether or not to use IPP over SSL. When selecting [On], set the IPP over SSL default
Port Number. Use the IPP over SSL default port 443. SSL must be set to [On] in SSL on page
9-20.*
Value: Off, On, Port:1 - 65535
Raw Port Select whether or not to receive documents using Raw Port.*
Value: Off, On
ThinPrint Select whether or not to use ThinPrint.
Value: Off, On
ThinPrintOverSSL Select whether or not to use ThinPrintOverSSL. SSL must be set to [On] in SSL on page 9-20.
Value: Off, On
* After changing the setting, restart the system or turn the machine OFF and then ON again.
Item Description
NetWare Select the NetWare network connection. After that, select frame types for NetWare network
from Auto, Ethernet-II, 802.3, 802.2, or SNAP.*
Value
Off, On, Frame Type: Auto, 802.3, Ether-II, 802.2, SNAP
* After changing the setting, restart the system or turn the machine OFF and then ON again.
Item Description
AppleTalk Select the Apple Talk network connection.*
Value: Off, On
* After changing the setting, restart the system or turn the machine OFF and then ON again.
Item Description
WSD Scan Select whether or not to use WSD Scan.*
Value: Off, On
* After changing the setting, restart the system or turn the machine OFF and then ON again.
Item Description
WSD Print Select whether or not to use WSD Print.*
Value: Off, On
* After changing the setting, restart the system or turn the machine OFF and then ON again.
Item Description
To Next Page
Loading...
