Kyocera TASKalfa 255 - Proof and Hold Print Box

5-6
Printing > Using a Job Box
Proof and Hold Print Box
Proof and Hold box stores the print data which is printed by using the printer driver as a Proof and Hold Print job.
Refer to the Printer Driver Operation Guide on how to print a job as Proof and Hold Print job using the printer driver.
For details, refer to RAM Disk Setting on page 9-21.
Setting the Number of Stored Jobs
To maintain free space on the hard disk, you can set the maximum number of stored jobs.
1
Display the screen.
2
Enter the maximum number of stored jobs.
You can enter any number between 0 and 50.
NOTE
RAM disk mode must be enabled. RAM disk mode can be used when optional memory has been installed.
NOTE
If you enter a value of 0 (zero), you cannot use the Proof and Hold function.
1
GB0054_02
GB0290_00
4
GB0310_00
3
2
GB0311_00
1
2