9-28
Setup, Registration, and User Management > User Login Administration
Enter a domain name.
When selecting [NTLM] or [Kerberos] as the server type, enter a domain name of 256
characters or less.
Enter the port number.
When selecting [Account Agency] as the server type, enter the port number.
If the login user name and password are rejected, check the following settings.
• Network Authentication setting of the machine
• User property of the Authentication Server
• Date and time setting of the machine and the Authentication Server
If you cannot login because of the setting of the machine, login with any administrator
registered in the local user list and correct the settings. If the server type is [Kerberos], only
domain names entered in uppercase will be recognized.
To Next Page
Loading...
