F. Y. I. Service Bulletin
HI-LYFE EXTENDED WEAR
RIBBON INSTALLATION
In an ongoing effort to provide you with the most complete and up-to-date information, we are
including this additional information on your machine, which may differ from the manual. Please read
this bulletin carefully. It contains current and updated information specific to your unit.
Any questions you may have regarding the information in this bulletin should be directed to your local
authorized CHICAGO
®
distributor or the Chicago Dryer Company factory Service Department at:
Purpose
The purpose of this bulletin is to provide
instructions for installing the latest, extended
wear HI-LYFE ribbons. These ribbons provide
superior quality linen finish.
Safety
Perform only when the unit is OFF
with power connected and COOL.
It is recommended that all maintenance
procedures be handled by at least two qualified
persons. Using the “buddy system” decreases the
risk of an accident.
WARNING
Follow lockout/tagout
procedures approved for
your site.
Follow local regulations.
Failure to do so could result
in serious injury.
Chicago Dryer Company
2200 N. Pulaski Rd.
Chicago, Illinois USA 60639-3737
(773) 235-4430
Fax (773) 235-4439
E-mail: service@chidry.com
Procedure
Return Ribbons:
Make sure the slightly darker side, is installed
facing the ironing cylinder.
Refer to the Chicago Dryer machine manual
for complete replacement procedure.
N O T E: B e sur e t o spe ci fy
HI-LYFE Extended Wear Ribbons
when you reorder.
HI-LYFE Extended Wear Ribbons 3023-135e
Chicago Dryer Company 1
To Next Page
Loading...