Lenovo ThinkServer RD330 - Changing the Security Key Identifier, Security Key, and Pass Phrase

Page 116
MegaRAID SAS Software User GuideChapter 4: WebBIOS Configuration Utility
| Selecting SafeStore Encryption Services Security
Options
Figure 71: System Restart
4.7.3 Changing the Security Key
Identifier, Security Key, and Pass Phrase
If you selected disk-based encryption when you made the RAID configuration, the drive
security will be enabled. Perform the following steps to change the encryption settings
for the security key identifier, security key, and pass phrase.
1. Click Drive Security on the main WebBIOS screen.
The Change Drive Security screen appears as shown in Figure72.
Figure 72: Change Drive Security Settings Screen7