Page 67
MegaRAID SAS Software User Guide Chapter 4: WebBIOS Configuration Utility
| Creating a Storage Configuration
Figure 31: WebBIOS Configuration Method Screen
6. On this screen, select a configuration mode:
— Manual Configuration: Allows you to control all attributes of the new storage
configuration as you create drive groups and virtual drives, and set their
parameters.
— Automatic Configuration: Automatically creates an optimal RAID
configuration.
— If you select Automatic Configuration, you can choose whether to create a
redundant RAID drive group or a non-redundant RAID 0 drive group. Select one
of the following options in the Redundancy field:
Redundancy when possible
No redundancy
— If you select Automatic Configuration, you can choose whether to use a drive
security method. Select one of the following options in the Drive Security
Method field:
No Encryption
Drive Encryption
7. Click Next to continue.
If you select the Automatic Configuration option, continue with Section4.5.2, Using
Automatic Configuration. If you select Manual Configuration, continue with
Section4.5.3, Using Manual Configuration.
4.5.2 Using Automatic Configuration Follow these instructions to create a configuration with automatic configuration, either
with or without redundancy:
To Next Page
Loading...
